Services

Leaning against long-term experience of specialists, a company LTD. “ИТЭУ-ИЖНИНИРИНГ” offers the row of decisions and complex approach in the decision of various questions on the computer-aided manufacturing and technological processes of any degree of complication : from creation of conception of project (decision) and planning of the system on the whole taking into account all her constituents, acquisition, editing, adjusting and introduction, an equipment and necessary materials to exploitation to warranty and to послегарантийному service.

Our possibilities are applicable in different industries of industry (electroenergy, metallurgy, chemical, machine-building, food), in the areas of automation and distribution of electric power. All project, assembling, starting-up and adjustment works are conducted on the basis of equipment and components of leading world producers the supplier of that also is a company LTD. “ИТЭУ-ИЖНИНИРИНГ”.

We offer

Development of project documentation that contains:

  • Collection of weekend of data for planning.
  • Requirement specification on planning.
  • Description of the systems of classification and code.
  • Chart of structural complex of technical equipments.
  • Description of complex of technical equipments.
  • Description of raising of tasks.
  • Description of the automated functions.
  • List of entrance and initial signals and data.
  • Charts of automation.
  • Plans of location of electrical engineering equipment and facilities of automation.
  • Charts fundamental unilinear, and also charts of internal and external connections.
  • Task to the plant on making of closets, panels and non-standard equipment.
  • Plans of placing of the cable routing and pipe wiring.
  • List of equipment and materials.
  • Description of the informative providing.
  • Development of application software of plc and hmi, description of software, description of algorithms.
  • Explanatory message.
  • Estimate documentation.

Acquisition an equipment and materials:

  • Supply of pressductors (absolute, surplus, overfall of pressure, dilution), temperature, expenses (electromagnetic, ultrasound, кориолисовые vortical), level (ultrasonic, radar, wave), mechanical sizes (vibration, linear moving) and position (electromagnetic, optical, энкодеры rope, laser and absolute).
  • Supply of transformers of frequency, executive mechanisms (single-breasted, multiturn, liliaceous action).
  • Making of distributive closets of low and middle tension, closets of automation and non-standard equipment under implementation of project.
  • Supply of cable-explorer products, systems of кабель-ростов and other assembling materials under implementation of project.

Assembling works:

  • Analysis and estimation of project documentation on accordance to the operating norms and rules, and also on accordance to the real terms of realization of project in case of work on a project that is given by Customer.
  • Pre-assembling verification (entrance control) of equipment and materials in case of their providing with Customer.
  • Editing of the systems of кабель-роста and other металлоконструкций for editing of cable-explorer products and sensors.
  • Editing of distributive closets, closets of automation, transformers of frequency, executive mechanisms.
  • Editing of cable-explorer products, verification of resistances of the mounted cables, establishment of the eventual gobbing.
  • Tacking of ends of wires and tendons of cables to the field equipment (sensors, transformers of frequency, executive mechanisms, electric motors and others like that) and distributive closets and management closets.
  • Forming of executive documentation.

Starting-up and adjustment works:

  • Stand checking of sensors for the primary stage of implementation of assembling works on condition of complex implementation of works (if starting-up and adjustment works are executed separately by other company, the order of realization of stand verification of sensors comes into question separately with Customer).
  • Verification of the executed assembling works, comparison of data of tuning of sensors in accordance with metrology certificates in case of implementation directly of starting-up and adjustment works.
  • Control of completion of assembling works on condition of complex implementation of works (not calculated by an estimate).
  • Tuning of sensors, transformers of frequency, executive mechanisms immediately in front of adjusting of the system on condition of complex implementation of works on a project.
  • Realization of individual tests of equipment.
  • Adjusting of the systems of measuring of technological parameters, adjusting of regulators of technological processes.
  • Realization of group and functional tests of work of equipment with bringing in of representatives of organization that executes the technological adjusting.
  • Preparation of current documentation on every stage of implementation of works.

Introduction to exploitation:

  • Realization of the finishing stages of adjusting works, preparation to the complex test.
  • Drafting of the program of complex test is conducted in parallel with a previous point.
  • Realization of complex assay (tests) together with operating service of Customer and other inferiors involved in tests by organizations.
  • Preparation of current documentation.

Warranty and then warranty service:

After introduction of object to exploitation on condition of implementation of regulation works in relation to maintenance of equipment, in accordance with the requirements of plants of manufacturers, operating services of Customer from the side of LTD. “ИТЭУ-ИЖНИНИРИНГ” are provide technical support of the equipment, put by Customer both the LTD. “ИТЭУ-ИЖНИНИРИНГ” and consultations mounted by forces in relation to his further exploitation.

After introduction of object to exploitation on condition of implementation of regulation works in relation to maintenance of equipment on a separate calculation we bear the complete responsibility forces of LTD. “ИТЭУ-ИЖНИНИРИНГ” in relation to providing of capacity of the equipment put on the conditions of the agreement during a warranty term.

Послегарантийное service is executed by forces of LTD. “ИТЭУ-ИЖНИНИРИНГ” on separate calculations and separate agreement.

The list of works, that is executed to LTD. “ИТЭУ-ИЖНИНИРИНГ” by Warranty or Послегарантийного service Agreement, is based on recommendations of plants of manufacturers and determined by Customer and LTD. “ИТЭУ-ИЖНИНИРИНГ”.

The specialists of LTD. “ИТЭУ-ИЖНИНИРИНГ” at one time executed next works:

Thermal power-station on a biopropellant in Переяслав-Хмельницкий of the Kyiv area that was transported from Great Britain to Ukraine:

  • Assembling works on electrical engineering part and editing of the system of automation.
  • Adaptation of the system of человеко-машинного interface to the requirements of operating personnel with translating from English into Ukrainian of videoshots of НМІ SCADA systems.
  • Adjustment in PLC of algorithms of work of basic technological equipment in accordance with the requirements of Customer.
  • Integration to the общестанционной system of новоприобретенных transformers of frequency.
  • Adjusting of channels of measuring of technological processes and adjusting channels.
  • Creation of new videoshots of reflection of work on новопоставленому to the technological equipment.
  • Adjusting of microsystem of defence of equipment of middle tension.
  • Adjusting of the system of activating of generator on the base of the system UNITROL – 1000.

NorthDonetsk ТЭЦ:

  • Planning of the checking and management of котлоагрегата №system 19.
  • Planning of the system of monitoring of work of тепломеханического equipment.
  • Thermal power-station on a biopropellant in Dare to the Cherkasy area are proceeding in the system of relay defence of distributive devices of 6кВ and 10кВ :
  • Testing of the existent system of defence.
  • Renewal of the system of defence with operating on disconnecting, on results tests.
  • Adjusting of relay part of the system of defence of networks of 6кВ and 10кВ and realization of retests.

Thermal power-station of БуТЕС in Бурштын of the Ivano-Frankivsk oblast – the reconstruction of power unit №5:

  • Reconstruction of electrical engineering part that plugged the reconstruction (editing and adjusting) of distributive networks of 0,4кВ and 6кВ networks of own necessities of power unit in the composition.
  • Reconstruction of the system of activating of generator of ТГВ- 200 with the use of the system of the thyristor activating of UNITROL 6800.
  • Compatible work with the specialists of ABB s.r.o. on adjusting of the checking and management system by power unit №5, that plugged in the composition of work on adjusting of sensors, executive mechanisms, channels of measuring and adjusting.
  • Participating is in warranty tests.

Thermal power-station of БуТЕС in Бурштын of the Ivano-Frankivsk oblast – the reconstruction of power unit №7:

  • Editing and adjusting of the field equipment of САР of турбоагрегата.
  • Participating is in warranty tests.

There is thermal power-station of МОЛДГРЕС in Днестровск, Moldova (modernisation of power units №№ 12, 11, 9):

  • Editing of металлоконструкций of the cable routing, editing of cable-explorer products.
  • Editing of sensors of measuring of technological parameters, editing of executive devices.
  • Adjusting of the field level of the system of automation of power units.
  • Participating is in warranty tests.

Reconstruction of plants on the production of building materials in plants on the production of aerocrete (АAС [Autoclaving Air Concrete] it is an autoclave aerocrete) in Березань, Обухов of the Kyiv area and in Вознесенск of the Mykolaiv area:

  • Editing of electrical engineering part and systems of automation.
  • Adjusting of the field devices and facilities of automation.
  • Participating is in warranty tests.

Reconstruction and modernisation of objects of metallurgical industry:

  • Reconstruction of АСУТВ ДП№4 ПАО МЕТІНВЕСТ “Запорожсталь”, assembling works and adjusting of the field equipment.
  • Major repairs of ДП№8 ПАО Арселор Миттал Crooked рог, АСУТВ, assembling works and adjusting of the field equipment.
  • Reconstruction of Workshop of сероочистки, АСУТВ.
  • Reconstruction of Workshop of Catching of the Коксохимического production of ПАО Арселор Миттал Crooked рог with introduction of subsystems of the Benzol separation, Ammoniac separation, System Машзалу turbo-compressors, to Pumping condensation and by Pump close loop of cooling of coke gases.

Also by the specialists of company ИТЭУ-ИНЖИНИРИНГ next works were executed:

ЦПП Complex of грохочения and briquetting of ferro-alloys, Automation: editing of the кабеленесущих systems, cable-explorer products, pressductors, temperature, expense, editing of management closets, adjusting of sensors and devices of visualization of technological parameters.

Pump close loop of cooling of coke gas, Automation: editing of the кабеленесущих systems, cable-explorer products, manometers, pressductors, temperature, expense, editing of management closets, adjusting of sensors and devices of visualization and registration of technological parameters.

ЦРМП drying drum, Automation: editing of the кабеленесущих systems, cable-explorer products, pressductors, temperature, expense, editing of management closets, adjusting of sensors and devices of visualization and registration of technological parameters.

ФСЛЦ Automation of газоочистки of электродуговой stove: editing of the кабеленесущих systems, cable-explorer products, manometers, pressductors, temperature, expense, editing of management closets, adjusting of sensors and devices of visualization of technological parameters.

АСУТП of Workshop of catching (of АСУТП of benzol separation, АСУТП машзала, АСУТП of pumping condensation, АСУТП ammoniac: editing of the кабеленесущих systems, cable-explorer products, manometers and technical thermometers, pressductors, temperature, expense, editing of management closets, adjusting of sensors and devices of visualization of technological parameters, adjusting of transformers of frequency, АСУ in part of software.

АСУТП converter: editing of the кабеленесущих systems, cable-explorer products, manometers and technical thermometers, pressductors, temperature, expenses, management closets, adjusting of sensors and devices of visualization of technological parameters, transformers of frequency, АСУ in part of software.

АСУТП of Workshop of сероочистки: editing of the кабеленесущих systems, cable-explorer products, manometers and technical thermometers, pressductors, temperature, expenses, closets of management, налада sensors and devices of visualization of technological parameters, transformers of frequency, АСУ in part of software.

АСУТП of high furnace (АСУТП of газоочистки, АСУТП of Block of air-heaters, АСУТП of шихтоподачи): editing of cable-explorer products, manometers and technical thermometers, pressductors, temperature, expenses, management closets, adjusting of sensors and devices of visualization of technological parameters, transformers of frequency.

Reconstructions of plants on the production of газобетонных blocks: editing of cable-explorer products, manometers and technical thermometers, pressductors, temperature, expenses, sensors of position, management closets, adjusting of sensors and devices of visualization of technological parameters, transformers of frequency.

Can the specialists of company ИТЭУ-ИНЖИНИРИНГ be mounted and adjusted next types of equipment and means of automation:

  • Sensors of surplus pressure of ДІ, discharging sensors surplus VIRGINS, sensors of differential pressure of ДД, sensors of hydrostatical pressure of ДГ.
  • The sensors of expenses are electromagnetic, sensors of expenses of кориолисовые, the sensors of expenses are ultrasonic.
  • Sensors of level of ultrasound, the sensors of level are radar, sensors of level are a wave, sensors of level are a piezometer.
  • Sensors of position of магнитоиндукционные, sensors positions optical, sensors positions a laser, энкодеры rope absolute, энкодеры laser.
  • Transformers of frequency are a three-phase and monophase.

LTD. “ИТЭУ” is licensed on the economic activity related to creation of objects of architecture.

 

PRESENTATION MATERIALS

presentation OOO “ITEU” download
Handout booklet Ltd. “ITEU” download
A complete list of works download
cooperation Offer download